Acura TSX 2009-2014 ABS Anti Lock Brake Pump Module Repair Service

If you own a 2009-2014 Acura TSX, a sudden illumination of the ABS, VSA, and Brake warning lights on your dashboard is a well-documented issue. This is almost always caused by an internal hardware failure within the Vehicle Stability Assist (VSA / ABS) control module. Dealerships usually push for a full replacement of the expensive hydraulic pump assembly. Our acura tsx abs module repair service targets the root cause of the electrical failure, offering a permanent and highly cost-effective solution.

Fixing the Acura TSX ATE (Continental) VSA Module

Manufactured by ATE (Continental), the electronic control unit bolted to your ABS pump handles all braking safety systems. Over time, the internal micro-circuitry, pressure sensor connections, and solenoid relays degrade from constant engine heat and vibration. This can result in communication drops, or worse, the ABS pump motor running continuously, which will drain your battery even when the car is turned off.

With our 2009-2014 tsx vsa module rebuild service, our engineers carefully open your original module, repair the broken circuitry, and upgrade the weakest factory components. Because we are rebuilding your exact original part, all of your Acura’s unique VIN configurations and immobilizer data remain perfectly intact. Once you receive the repaired unit back, you simply bolt it on and plug it in—no expensive dealer coding or adaptation is required! Best of all, standard hydraulic braking is unaffected, meaning you can safely drive your TSX while the electronic module is at our shop for repair.

Common Drivability Symptoms We Fix

• Warning Lights: The ABS, VSA, and Brake lights are constantly on.
• Constant Pump Operation: The ABS pump motor runs non-stop, killing the vehicle’s battery.
• No Communication: Diagnostic OBD2 scanners cannot read or connect to the ABS computer.

Supported Diagnostic Trouble Codes (DTCs)

If your diagnostic scanner pulls any of the following fault codes, your module is a perfect candidate for our acura vsa internal failure rebuild service:

• DTC 31-11 through 38-11: ABS Solenoid Valve Malfunctions.
• DTC 121-11 through 124-11: VSA Solenoid Valve Malfunctions.
• DTC 66-11, 66-13: Pressure Sensor Circuit Malfunctions.
• DTC 81-19, 81-20, 129-3: Yaw Rate & Acceleration Sensor Internal Circuit Malfunctions.
• DTC 133-1: VSA System Malfunction.

Important Shipping Instructions & Terms

To safely utilize this service and save significantly on shipping costs, DO NOT ship the entire metal hydraulic ABS pump. Carefully remove the torx screws to separate the black plastic electronic control module from the pump block, and send the computer only. After reinstalling the repaired module, use an OBD2 scanner to clear the old historic DTCs from the system’s memory before driving.
Please note: Not all computers can be fixed (e.g., severe physical crash damage or fire). Unrepairable units will be returned with a refund, minus a $100 diagnostic fee and return shipping costs.