JEEP WRANGLER ABS EBCM Module Repair Service

If you own a 2006-2016 Jeep Wrangler (JK), you might be familiar with the dashboard suddenly lighting up like a Christmas tree. When the ABS, ESP (Electronic Stability Program), BAS (Brake Assist System), and Traction Control lights all illuminate at once, it typically points to a total failure of the ABS Electronic Brake Control Module (EBCM). Dealerships will usually recommend replacing the entire hydraulic unit for thousands of dollars. Our jeep wrangler abs module repair service provides a much smarter, cost-effective alternative by rebuilding your original unit.

Fixing the Jeep Wrangler JK ABS Module Failure

The electronic control module attached to your ABS pump is exposed to engine heat, heavy vibration, and moisture. Over time, the internal circuitry and micro-relays degrade. This leads to communication failures, or the pump motor relay getting stuck in the “On” position, which will drain your battery overnight even when the Jeep is turned off.

With our 2006-2016 jeep abs repair service, our technicians open your original control module, repair the broken circuitry, and upgrade the factory components to heavy-duty alternatives. Because we rebuild your exact module, all of your Jeep’s unique VIN and software configurations are preserved. Once you receive the repaired unit, you just bolt it back on and plug it in—no dealer programming or expensive software flashing is required. As an added benefit, your standard hydraulic brakes will remain fully functional, allowing you to safely drive your Jeep while the electronic module is at our shop.

Common Drivability Symptoms We Fix

• Warning Lights: The ABS, ESP, BAS, and Traction control lights remain permanently illuminated on the instrument cluster.
• Constant Pump Operation: The ABS pump motor runs non-stop, eventually killing the vehicle’s battery.
• No Communication: Diagnostic scanners cannot read or connect to the ABS computer.

Supported Diagnostic Trouble Codes (DTCs)

If your module is throwing any of the following fault codes, it is a perfect candidate for our rebuild service:

• C2200: Anti-Lock Brake Module Internal Fault (This is the most common failure for the Wrangler).
• C1440, C1288: Brake Pressure Transducer Issues.
• C1300, C1963: Various internal ABS system and communication trouble codes.

Supported Vehicles (2006-2016)

This rebuild service covers all trims (Sport, Sahara, Rubicon) of the 2006-2016 Jeep Wrangler (JK), Grand Cherokee, Cherokee, Compass, Patriot.

Important Shipping Instructions & Terms

To safely utilize this service and save significantly on shipping costs, DO NOT ship the entire metal hydraulic ABS pump. Carefully remove the Torx screws to separate the black plastic electronic control module from the pump block, and send the computer only. After reinstalling the repaired module, use an OBD2 scanner to clear the old historic DTCs from the system’s memory before driving.
Please note: If we test your module and it cannot be repaired due to severe physical damage (like fire or a major off-road water flood), it will be returned to you with a refund, minus an $100 diagnostic fee and return shipping costs.