Mercedes ELV Emulation (bypass)

When we receive your original ELV, EIS and key then we will prepare the emulator. Our ELV  emulator is a “black box” that places to the same original ELV connector under the steering column. Your car will start right after EIS and emulator connected back to its original harness. Your original malfunctioned ELV will be recycled after we assign emulator to your ignition set. Plug-n-play, no extra programming.

Dashboard message “Remove key”
Vehicle won’t start and the steering doesn’t unlock
Noisy steering lock
Key will turn in Electronic Ignition Switch (EIS / EZL) but will not start
No dash lights when turning key in EIS (Electronic Ignition Switch)
Electronic steering lock (ESL / EVL) cannot be heard when the key is inserted into EIS lock.
The steering wheel cannot be turned, even with the key inserted into EIS.
Fault code 9003, N26/5 ESL / ELV control unit. No feedback during unlocking. The steering is under stress.
Fault code 9005, N26/5 ESL / ELV control unit. Communication fault (Check Fuse/Power to ELV First)

Fault code 9003, N26/5 ESL / EVL / ELV control unit. No feedback during unlocking. The steering is under stress.
Fault code 9005, N26/5 ESL / EVL / ELV control unit. Communication fault. (Check Fuse/Power to ELV First)
A22449 – The electronic ignition lock has a malfunction. There is an internal electrical fault.
A25407 – The electronic steering lock has a malfunction. There is a mechanical fault.
A25408 – The electronic steering lock has malfunctioned. There is a signal fault or the message is faulty.
A25409 – The electronic steering lock has a malfunction. There is a component fault.
A25464 – The electronic steering lock has a malfunction. There is an implausible signal.

EIS, one original key and malfunctioned ESL module.

Mercedes W639
Mercedes W906
Mercedes W209
Mercedes W211
Mercedes W219
Mercedes W202
Mercedes W208
Mercedes W210
Mercedes W203
Mercedes W463
Mercedes W169